QPoint Tap Water Filter
The high technology integrated prefiltration layer delivers exceptional particulate trapping capacity with good flow rates, and protects the sterilizing grade membranes enabling long performance life. The Filter Capsule retains bacteria, protozoa, fungi, and particles.
QPoint® Water Filter Assemblies
The QPoint Tap Water Filter Assembly with exchangeable Filter Capsule for up to 62 days (2 months) use provides 0.2 µm sterilising-grade filtered water at the Point-of-Use. The high technology integrated prefiltration layer delivers exceptional particulate trapping capacity with good flow rates, and protects the sterilising grade membranes enabling long performance life. The Filter Capsule retains fungi, protozoa and bacteria such as Legionella spp., Pseudomonas spp., non-tuberculous mycobacteria and Escherichia coli without volume restriction. A combination of technologies within the Filter Capsule helps to minimise the risk of retrograde contamination. However, these technologies do not replace local water testing and/or hygiene measures at the local environment.
Installation of the QPoint Shower Water Filter Assembly significantly reduced the percentage of bacteria positive water samples in both immediate and 1 minute flush samples. The mean and range of counts was also significantly reduced in filtered samples. While the Filter Capsule incorporates a bacteriostatic additive within the plastic housing material and an inner shield protection device to minimize the risk of retrograde contamination, the extent of such contamination will depend heavily on local environmental factors.
The QPoint Tap Water Filter Assembly with exchangeable Filter Capsule for up to 62 days (2 months) use provides 0.2 µm sterilising-grade filtered water at the Point-of-Use. The high technology integrated prefiltration layer delivers exceptional particulate trapping capacity with good flow rates, and protects the sterilising grade membranes enabling long performance life. The Filter Capsule retains fungi, protozoa and bacteria such as Legionella spp., Pseudomonas spp., non-tuberculous mycobacteria and Escherichia coli without volume restriction. A combination of technologies within the Filter Capsule helps to minimise the risk of retrograde contamination. However, these technologies do not replace local water testing and/or hygiene measures at the local environment.
Installation of the QPoint Shower Water Filter Assembly significantly reduced the percentage of bacteria positive water samples in both immediate and 1 minute flush samples. The mean and range of counts was also significantly reduced in filtered samples. While the Filter Capsule incorporates a bacteriostatic additive within the plastic housing material and an inner shield protection device to minimize the risk of retrograde contamination, the extent of such contamination will depend heavily on local environmental factors.
QPoint Shower Water Filter
A wide variety of systemic chemical treatments are used to mitigate microbial contamination within potable water supplies to hospitals, hotels, leisure centers, schools, apartment blocks and other building complexes. Such chemical treatments may be used in conjunction with Pall Point-of-Use Water Filters as part of the engineering solution.
Pall-Aquasafe™ Disposable Water Filters
Pall-Aquasafe Water Filters for up to 31 day use provide filtered water for topical use and consumption*. The double layer sterilizing grade Supor® membrane is rated and validated at 0.2 μm, and provides a barrier against waterborne bacteria, fungi, protozoa, and particles which are larger than 0.2 μm. To minimize the risk of inadvertent cross-contamination and retrograde contamination, the filter housing material utilizes a non-leaching bacteriostatic additive.
* Where local practices and regulations allow.
Pall-Aquasafe Water Filters for up to 31 day use provide filtered water for topical use and consumption*. The double layer sterilizing grade Supor® membrane is rated and validated at 0.2 μm, and provides a barrier against waterborne bacteria, fungi, protozoa, and particles which are larger than 0.2 μm. To minimize the risk of inadvertent cross-contamination and retrograde contamination, the filter housing material utilizes a non-leaching bacteriostatic additive.
* Where local practices and regulations allow.
Pall-Aquasafe™ AQ31F1SA and AQ31F1RA Disposable Water Filters
Pall-Aquasafe Water Filters for up to 31 day use (AQ31F1SA and AQ31F1RA) provide filtered water for topical use and consumption*.
The double layer sterilizing grade Supor® membrane is rated and validated at 0.2 μm, and provides a barrier against waterborne bacteria, fungi, protozoa, and particles which are larger than 0.2 μm.
Pall-Aquasafe™ Disposable Water Filters
Pall-Aquasafe Water Filters for up to 31 day use provide filtered water for topical use and consumption*.
The double layer sterilizing grade Supor® membrane is rated and validated at 0.2 μm, and provides a barrier against waterborne bacteria, fungi, protozoa, and particles which are larger than 0.2 μm.
To minimize the risk of inadvertent cross-contamination and retrograde contamination, the filter housing material utilizes a non-leaching bacteriostatic additive.
* Where local practices and regulations allow.
Pall-Aquasafe Water Filters for up to 31 day use provide filtered water for topical use and consumption*.
The double layer sterilizing grade Supor® membrane is rated and validated at 0.2 μm, and provides a barrier against waterborne bacteria, fungi, protozoa, and particles which are larger than 0.2 μm.
To minimize the risk of inadvertent cross-contamination and retrograde contamination, the filter housing material utilizes a non-leaching bacteriostatic additive.
* Where local practices and regulations allow.
Pall-Aquasafe™ AQINA In-Line Disposable Water Filter
In-Line Disposable Water Filter with Quick Connect Inlet
and Outlet Ports (AQINA) – 31 Day Use
Pall-Aquasafe Water Filters for up to 31 day use (AQINA) provide filtered water for use in applications where in-line water filters are required to maintain water quality for ice machines and water dispensers. The double layer sterilizing grade Supor® membrane is rated and validated at 0.2 μm, and provides a barrier against waterborne bacteria, fungi, protozoa and particles which are larger than 0.2 μm.
To minimize the risk of inadvertent cross-contamination and retrograde contamination, the filter housing material utilizes silver technology as an enhanced, non-leaching bacteriostatic additive.